Centre Drill A2 DIN 333 Form A

HSS centre drill, form A, 2 mm pilot on a 5 mm body.

− +

Add to Cart

Specifications

Size designation	A2
Pilot diameter	2 mm
Body diameter	5 mm
Overall length	50 mm
Pilot length	1.9 mm
Countersink angle	60°
Material	HSS
Standard	DIN 333 form A

Description

A form A centre drill to DIN 333, used to start an accurate hole and to cut the 60° centre that a lathe tailstock or a between-centres grinding operation locates on. The short stiff pilot resists the wandering that a long jobber drill suffers on an unprepared face, which is why centre drilling first is standard practice before any deep hole. Form A has a plain 60° countersink; form B adds a protecting 120° chamfer.