Machine Tap M8 x 1.25 HSS-E DIN 371

HSS-E machine tap, M8 coarse thread, 1.25 mm pitch, to DIN 371.

− +

Add to Cart

Specifications

Thread size	M8
Pitch	1.25 mm
Recommended tap drill	6.75 mm
Overall length	90 mm
Shank diameter	8 mm
Material	HSS-E (cobalt)
Thread form	ISO metric coarse
Standard	DIN 371

Description

A cobalt-alloyed HSS-E machine tap for cutting M8 coarse internal threads under power, in a tapping head, a rigid-tapping spindle or a tapping attachment. The tap drill size for a nominal 65% thread engagement is 6.75 mm — drilling undersize is the usual reason taps break, because thread engagement above about 75% multiplies torque for almost no gain in joint strength. Spiral point for through holes; use a spiral flute version in blind holes so the chip is pulled back out of the hole.