T-Nut M16 for 18mm Slot DIN 508
Part Number: JF-00025
Price on request
Available to order
Hardened T-nut, M16 thread, for a 18 mm table slot, to DIN 508.
Specifications
| Thread | M16 |
| Table slot width | 18 mm |
| Head width (A) | 30 mm |
| Base width (B) | 32 mm |
| Overall height (H) | 24 mm |
| Material | Hardened steel |
| Standard | DIN 508 |
Description
A hardened T-nut to DIN 508 for a 18 mm machine table slot, threaded M16. The nut carries the whole clamping load into the table slot, so it is hardened — an unhardened nut spreads under load and jams in the slot, and getting it out usually damages the slot. Match the nut to the slot width, not to the stud: a nut that is loose in the slot will rock under clamping pressure and lift the workpiece.